Sealant, removable
BDYWRKSEAL-DABABLE-BLACK-310ML
Register now and access more than 125,000 products
Forms a skin after a few minutes
Surface skin re-forms if the joint is damaged
Remains permanently sticky, does not harden and does not run off
Excellent material compatibility
Chrome, paint and rubber are not affected
Does not become brittle
Not suitable for expansion joints.
The usage instructions are recommendations based on the tests we have conducted and our experience. Carry out your own tests before each application. Due to the large number of applications as well as storage and usage conditions, we do not assume any liability for a specific application result. Any technical information or advice provided by our free customer service shall be provided to the exclusion of any liability, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting wilfully. We ensure the consistent quality of our products. We reserve the right to make technical changes and further developments to our products.
Can be used for installing windows in caravan, wagon and container construction as well as in mobile home, motor home and commercial vehicle construction, shipbuilding and equipment engineering. Suitable for sealing rubber-glass connections in cars, buses, lorries, sunroof systems, skylights, service and luggage compartment doors, ventilation systems, solar panels, curved connections, handles, strips, consoles, cracks, transitions, overlaps, screw connections, roof systems, trim strips, awning rails, windows, light domes and underneath cover strips.
The surfaces to be sealed must be clean, dry and free of grease. Spray sealant into joints, grooves, crevices, etc. and spread. Excess material can be dabbed off using the material itself or using bodywork sealing tape (after a brief flash-off time). For more information, please refer to the technical data sheet.
Chemical basis | Polyisobutylene |
Colour | Black |
Smell/fragrance | Characteristic |
Min./max. temperature resistance | -30 to +100 °C |
Resistance against | Water, Alkaline water, Aging |
Min. flashing point | -25 °C |
Recoatable/Can be painted over | No |
Ultraviolet resistance | Very good |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Flat chisel In line with DIN 6453
All-rounder injectable mortar WIT-VM 250
Bit box, size 1 9 pieces
Masking tape, regular quality
HD hose clamp For heavy-duty trucks
Core drill DS 180-T
Carriage For the DS 180 core drill
Hard surface adapter for the spray extraction device floor nozzle for cleaning hard floors
SMART STEP EU+ HSCo nanoProtect hexagon twist drill bit for drill/drivers and tangential impact drivers
SMART STEP EU+ HSCo nanoProtect hexagon combination screw tap