LIGHT floor marking adhesive tape
FLRMRKADHTPE-LIGHT-GREEN-50MMX33M
Art.-no. 0812449656
EAN 4056807861203
Register now and access more than 125,000 products
Matt soft-PVC tape with pressure-sensitive rubber adhesive
- Outstanding resistance to abrasion, corrosion and moisture.
- Good abrasion resistance.
- Excellent conformability.
- Suitable for pedestrians.
Compatible with a wide range of surfaces
- Suitable for smooth concrete screed, EP/PU/MMA coatings and tiles.
- For smooth surfaces in indoor areas.
Easy to use
- Self-adhesive, with excellent adhesion on smooth surfaces.
- Quick application, immediately suitable to be walked on and easy to clean.
- Quick and efficient to use.
- Can be torn off by hand.
- Can be removed without residue for cleaning or maintenance.
Supports 5S projects
- Clear delineation of workspaces.
- Visible marking of traffic routes.
- Efficient demarcation of safety zones.
- Available in a variety of colours for flexible marking.
Silicone-free
- Complies with EU Directive 2000/53 (free from lead, chromium VI, mercury and cadmium).
- Suitable for areas without forklift traffic or other heavy loads.
The usage instructions are recommendations based on the tests we have conducted and our experience. Carry out your own tests before each application. Due to the large number of applications as well as storage and usage conditions, we do not assume any liability for a specific application result.
Any technical information or advice provided by our free customer service shall be provided to the exclusion of any liability, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting wilfully. We ensure the consistent quality of our products. We reserve the right to make technical changes and further developments to our products.
Datasheets(X)
The LIGHT soft-PVC floor marking adhesive tape with pressure-sensitive rubber adhesive allows for quick and easy marking of traffic lanes, work and safety areas, parking and storage zones, walls and edges. It enables clear orientation and increased safety, is ideally suited to frequently changing, temporarily colour-coded route markings and supports the implementation of 5S and Lean projects thanks to its high adhesive strength, resistance to abrasion and excellent conformability.
The tape is highly versatile, e.g. for temporary markings in locations such as sports halls, fairs or exhibitions, for clearly demarcating machinery and work areas, for temporarily directing traffic on construction sites and in the event of changes to production or detours, as well as for visually marking steps, ramps and edges for increased safety. It is also suitable for delineating workspaces, storage areas and traffic routes by colour, for marking storage units, shelving bays, parking spaces and picking zones, and for signage in pedestrian zones, meeting spaces and sports/leisure areas.
Thanks to its excellent adhesion on smooth surfaces such as concrete, tiling and EP, PU and MMA coatings, the LIGHT floor marking adhesive tape is ideal for short-term, frequently changed markings and flexible safety signage in a wide variety of applications.
For optimal adhesion, the substrate must be clean, dry and free from release agents such as grease, oil, surfactants, dirt and dust. On certain surfaces, it is recommended that butyl primer also be used - in particular on concrete, asphalt, untreated and unpainted wood and all rough and grained surfaces.
To increase adhesion and durability, the LIGHT floor marking adhesive tape should be firmly pressed into place after being applied. A press-on roller works especially well for this.
Colour | Green |
Material | PVC - Polyvinyl chloride |
Adhesive base | Natural rubber |
Length | 33 m |
Width | 50 mm |
Thickness | 160 µm |
Min./max. processing temperature | 12 to 40 °C |
Min./max. temperature conditions | -20 to 120 °C |
Shelf life from production/conditions | 24 Month / cool and dry storage area, no exposure to sunlight, 15°C to 25°C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Circlip for bore hole, standard version, type J DIN 472 for bore holes, spring steel, phosphated and oiled
Fibre disc 1182C 3M Cubitron 3
Twist drill bit HSCo8 WN MAGMA
Extension for elevator tripods
Locking Pliers welded with half-round jaws REDSTRIPE
Cylinder saw adapter A2 With ejection function
Impact tool Pin punches with pilots in accordance with DIN 6450
Hose clamp with clamping jaw
Deburring blade, E series
Sweater Nordic Hi-Vis cl.3