Impact tool Pin punches with pilots in accordance with DIN 6450
Pin punch, locking pins
PINPNCH-TAP
Register now and access more than 125,000 products
Chromium-vanadium air hardening steel
Tempered safety hammer heads
Prevents hammer head from developing bulges or splintering
Fully hardened shaft
Particularly tough and wear-resistant as a result
Pilots on shaft of pin punch
Used to perfectly centre tool on clamping sleeves.
Datasheets(X)
 | |
Length (l1) | 180 mm |
Blade length (L2) | 95 mm |
Width of tip (d) | 6 mm |
Striking-surface diameter (a) | 10 mm |
Length of tenon | 5 mm |
Diameter of tenon | 3 mm |
Last viewed
Guide spiral
1/2 inch impact socket wrench insert hexagon, metric, short
Jamo 4 CS screw for adjustable distance mounting Steel zinc-plated partial thread with underhead thread for adjusting the countersunk head
Hand tap, taper tap HSS DIN 352
TIME-SERT® threaded bushing
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Hexagon socket set screw with ring cutter ISO 4029, A4 stainless steel, 21H, plain
3/8-inch socket wrench for TX screws, short
Auger drill bit Longlife & Speed
Nail clip Tillex C