pias self-drilling screw, countersunk head with AW recess
SCR-DBIT-CS-AW30-(A3K)-6,3X38
Art.-no. 020576338
EAN 4038898570547
Register now and access more than 125,000 products
- Drilling, thread forming and screwing in one step, saving significant time and effort
- Ensures an exact drill hole diameter for each screw connection, minimises the thread tolerance and therefore ensures an optimum connection at all times
- Prevents mistakes in the installation
- AW recess system for better torque transmission, a longer service life and optimal centring
- Contact pressure during use approx. 100 N, screw in with depth stop if necessary.
- Self-drilling screws must be installed with a suitable drill/driver (e.g. cordless drill/driver with depth stop).
- The use of impact drivers is not permitted.
- Self-drilling screws must be screwed in perpendicular to the surface of the component.
Zinc plated self-drilling screws must only be used in locations where permanently damp conditions are not expected - condensation is not considered a permanently damp condition (corrosivity category ≤ C2 in accordance with DIN EN ISO 12944-2). For fasteners with technical approval, the approval, and in particular Part 2 "Special regulations", must always be observed.
Datasheets(X)
 | |
Other standard | Company standard |
Material | Steel |
Surface | Zinc plated |
Nominal diameter (d1) | 6.3 mm |
Length (l1) | 38 mm |
Head diameter (dk) | 12.4 mm |
Head height (k1) | 4.3 mm |
Internal drive | AW30 |
Drill tip length (lp) | 6.5 mm |
Head type | Countersunk head 80 degree |
Thread type | Self-tapping screw thread |
Min. recommended substructure thickness | 2 mm |
Max. material thickness to be drilled through (metal) | 6.0 mm |
Min./max. recommended installation speed (idling) | 1200-1800 rpm |
RoHS-compliant | Yes |
Last viewed
Marker pen Sharpie Magnum 44
Hexagon bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, zinc-plated, blue passivated (A2K)
Plus Quadro-L hammer drill bit
Precision engineering screwdriver with bit chuck
Joint for Top Gun paint guns and cleaning gun
Universal protector W.TEC® WP 600 cover cap
Flat washer without chamfer ISO 7089 steel 200 HV, zinc-plated, blue passivated (A2K)
ORSY BULL series 5 drawer box
Sheet metal separating chisel for pneumatic chipping hammers