pias® drilling screw with hexagon head and drill tip case-hardened steel, zinc-plated, blue passivated
pias W-214 steel zinc plated hexagon head
SCR-DBIT-WS8-(A3K)-5,5X50
Register now and access more than 125,000 products
Reduction of the assembly time using the drill bit tip by min. 50%:
- Drilling without centrepunching
- Thread moulding
- Securing
All in one operation
Suitable for component combinations tI/tII according to approval ETA-10/0184
- Steel/steel for ∅ 4.2 mm-6.3 mm
- Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)
- The use of impact screwdrivers is not permitted
- Drilling screws must be attached perpendicular to the surface of the component
Zinc-plated drilling screws may only be used where dampness is not to be expected. For connection elements with a construction permit, the permit, and in particular Part 2 "Special regulations", must always be observed.
Datasheets(X)
Last viewed
Granite floor panel
ASSY® 4 WH washer head screw Steel zinc flake partial thread washer head
W-BS-I MULTI internal thread concrete screw anchor Zinc-plated steel
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, zinc-plated, blue passivated (A2K)
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Hi-vis lightweight vest hook-and-loop fastening
Heavy-duty anchor W-TM type A with internal thread
Hexagon bolt with thread up to the head DIN 933, A4 stainless steel, plain
Crimping pliers With integrated locator
Safety boot S3 Jalas 2718 Zenit