pias® drilling screw, round head with collar and H recessed head
SCR-DBIT-PANHD-FLG-H2-(A2S)-4,2X13
Art.-no. 021824 13
EAN 4038898520344
Register now and access more than 125,000 products
Drilling, threading, screwing-in — all in one work step
Therefore considerably reduced time and effort
Exact drilling diameter for each screw connection
- Resulting in minimisation of thread tolerance
- Always an optimum connection
Prevents installation errors
- The pressed-on flange generates a lower surface pressure, which helps to prevent stress cracks
- Contact pressure during use approx. 100 N/screw in with depth stop if necessary
- Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)
- The use of impact screwdrivers is not permitted
- Drilling screws must be attached perpendicular to the surface of the component
Galvanized drilling screws may only be used where dampness is not to be expected.
For fasteners with a construction permit, the permit, and in particular Part 2 "Special regulations", must always be observed.
Datasheets(X)
The self-drilling screw for fastening plastic and thin sheet metal to metal sub-structures.
Last viewed
Thin-walled heat-shrink hose shrink rate 3:1, with internal adhesive
Small abrasives mini fleece disc
VARIFIX® base plate
Hexagon bolt with thread up to the head DIN 933, A2 stainless steel, plain
Toe warmer Nevercold
Rechargeable LED hand-held lamp Ergopower TINY
Hi-vis work trousers KAJO STRETCH class 2
ALLEN KEY HEXAGONAL (HEX) – EXTRA LONG BLADE
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 A2 stainless steel
Fire-retardant silicone SIL 240