Torque wrench 1/2 inch, limited edition
Torque wrench 1/2 inch RW Edition
TRQWRNCH-1/2IN-(RW EDITION)-(40-200NM)
Art.-no. 07142021
EAN 4062856609161
Prices for customers after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +372 5251 222.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Torque wrench with Reinhold Würth signature. Würth will donate 2 euro to a charitable organisation from the proceeds of each product sold.
- With flanged head reversible square drive
- Easy-to-read double scale of Nm and lbf.ft with magnifying effect
- Additional micrometer scale, scale graduation of 1.0 Nm for precise installation torque adjustment
- For controlled clockwise and anti-clockwise tightening
- Adjustment knob with visible lock symbol
- Permissible deviation of +/-3 % - therefore more precise than the +/-4 % required by the standard
Notice
- The flanged head prevents the entire square drive from being pulled out unintentionally when changing the sockets
- To change the direction of rotation, the flanged head must be removed and the square drive inserted on the other side
Classified according to DIN EN ISO 6789:2017 Type II with calibration certificate
Product information
Datasheets(X)
Tip size | 1/2 inch |
Min./max. torque measuring range | 40-200 Nm |
ISO | DIN EN ISO 6789-1:2017 |
Length (L1) | 485 mm |
Last viewed
Tungsten electrode, gold for WLV17/WLT17K/WLT26 TIG torches
Pipe cable lug with inspection hole
Thread-rolling screw
RW® bit
Wire feed roller
DUO wire end ferrule with plastic sleeve
Wedge lock washer W.TEC, narrow shape
Lock washer For shafts DIN 6799, phosphated steel
Hexagon Socket Head Cap Screw full thread ISO 4762/DIN 912, steel 12.9, plain, with full thread
Hexagon bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032