Shank coil nails 16°, ringed shank Conical coil
RDMGNL-16DGR-CONI-(SHNK-RG)-(HDG)-2,1X38
Art.-no. 048192138
EAN 4061975597502
Register now and access more than 125,000 products
Hot-dip galvanised conical coil nails can be used in nailers designed for conical (dome-shaped) coil nails.
Most commonly, coil nails are used for fastening exterior cladding, soffits, window reveals or similar applications.
Würth 16° coil nails are compatible with all nailers using corresponding nails. When using a coil nailer, it is recommended to use a compressor with high air output, as a dense nailing rate can easily consume over 200 l/min of air.
- Coil nail - uninterrupted working
- Very small, round head leaves a very clean finish
- 2.1 mm nail is ideal for finishing exterior cladding
- Window reveals, corner boards, eaves etc.
Datasheets(X)
Nominal diameter (d1) | 2.1 mm |
Length (l1) | 38 mm |
Material | Steel |
Surface | Hot dip galvanized |
Number per pallet | 179200 PCS |
RoHS-compliant | Yes |
Last viewed
Ratchet magazine screwdriver Wood/construction
1C foam applicator gun PURLOGIC® COMBIpress
Round, flexible adapter for dent lifter and pin puller
Assembly wedge set
Pin punch
Countersink, yellow/blue ring, HSS 90° DIN 335 C
3/4-inch connector
Flat washer with large external diameter ISO 7093-1, steel 200 HV, zinc-nickel plated black (ZNBH)
Cordless angle grinder AWS 18-125 P COMPACT M-CUBE
Hexagon bolt with thread up to the head DIN 933, steel 8.8, plain