Welcome to Würth Estonia For trade customers only

Sealing tape Flexband Easy indoor SK/VSK

SEALTPE-FLEXBAND-EASY-IN-SK/VSK-68MMX30M

Art.-no. 0875276070

EAN 4099618604478

Individual price display after login
Sealing tape Flexband Easy indoor SK/VSK

Art.-no. 0875276070

Individual price display after login
Quantity
PU
x 2 pcs

Show availability in Würth shop
Exclusively for trade customers

Register now and access more than 125,000 products

Window sealing tape with full-surface adhesion, highly adhesive and built-in fingerlift for sealing joints in indoor areas with standard requirements

Tested sealing properties


  • Corresponds to the requirements of ÖNORM B5320

  • Air-tight and slows down steam diffusion (SD value 20 m)


Full-surface self-adhesion and self-adhesive with strongly adhesive acrylic adhesive


  • Processing possible from -10 °C

  • Can be glued on one or both sides

  • Simpler processing due to built-in fingerlift


Suitable for plastering over and painting over


Fleece ensures very good adhesion for all standard plasters



Resistant, ductile fleece with high tear resistance


  • Safe and simple installation

  • Additional safety with component movements
Notice

On mineral and highly absorbent surfaces, use an adhesion primer spray or butyl/bitumen primer.


An excess length of 2 to 5 cm must be maintained in the corner area, depending on the joint width. We recommend the integration of a movement loop.

This information is intended to advise you to the best of our knowledge, based on our tests and experience. However, due to the large number of applications and the storage and handling conditions that lie outside the scope of our influence, we assume no liability for the application results in individual cases. This also applies to the use of the non-binding technical and commercial customer service provided by us. We always recommend that you conduct your own tests. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. For further information, please refer to the technical data sheet.

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

Sealing of window and door joints in new buildings on even surfaces.

Instructions

1. Preparation:


Roughly clean the surfaces of soiling. When using on very difficult surfaces (e.g. soft fibre insulation board), a primer must be used.


2. Installation on window:


Stick the window sealing tape with self-adhesive to the back of the blind frame and press on firmly using a press-on roller. Fit the window and fill with PU foam.


3. Installation on masonry:


Fix the full-surface acrylate strip on the wall and press on firmly with a press-on roller.

Colour

Grey

Backing material

PP foil

Width

70 mm

Thickness

0.6 mm

Length of roll

30 m

Min./max. processing temperature

-10 to 35 °C

Min./max. temperature resistance

-15 to 60 °C

Building material class/conditions

D - Normally inflammable / in accordance with DIN EN 13501-1

Ultraviolet resistance

3 months

Air layer thickness equivalent to water-vapour diffusion/conditions

32 m / in accordance with EN ISO 12572

Shelf life from production/conditions

12 Month / dry storage area, 5°C to 25°C

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information