Plugin nipple comfort connection series 2000 for Würth PU hoses
Nipple, comfort connection, series 2000
NPL-PN-2000-6,5X10MM
Register now and access more than 125,000 products
- A high flow rate of up to 2,100 l/min at a maximum working pressure of 16 bar enables optimum compressed air supply and consumer performance - for higher productivity and lower energy costs
- Hardened steel nipples ensure maximum load capacity and a long service life
- Airtight connections ensure low energy use and high efficiency
- Exposed surfaces are chrome plated, nickel plated or zinc plated and therefore offer high corrosion resistance and protection even under demanding conditions
- The 2000 series fittings comply with the Euro standard, have a nominal diameter of 7.6 mm and are compatible with other pneumatic fittings due to the Euro profile
Unscrew locking sleeve and push over the hose.
Then slide hose up over grommet as far as possible while twisting back and forth slightly.
Then screw on the locking bush as far as possible.
Datasheets(X)
Material | Steel |
Suitable for hose internal diameter | 6.5 mm |
Suitable for hose external diameter | 10.0 mm |
Length (L) | 44 mm |
Surface | Zinc plated |
Width across flats (SW) | 16 mm |
Max. pressure | 16 bar |
Flow capacity | 2100 l/min |
Last viewed
Split pin ISO/WN 1234 steel zinc-plated
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, A4 stainless steel, plain
3/4-inch impact socket wrench insert hexagon, metric, long
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, plain
Insoles Jalas Neutralizer 8709H
Spinner nut nyloc
Flanging mandrel DIN for mobile universal flaring tool
Eye bolt with full thread DIN 444, steel 8.8, zinc-plated, blue passivated (A2K), shape LB
Countersunk screw with hexagon socket, galvanised ISO 10642, steel 10.9, zinc-plated, blue passivated (A2K)
Techno S1P FLEXITEC® safety sandals