Pan head tapping screw, type C, PH recess DIN 7981, A2 stainless steel, shape C, with tip
SCR-PANHD-DIN7981-C-H2-A2-4,2X70
Art.-no. 011942 70
EAN 4024835455800
Register now and access more than 125,000 products
- Tapping screws are thread-forming screws. These screws form their own counter thread when screwed into a prefabricated tapping hole
- Reference values for selecting the correct core-hole diameter are included in DIN 7975
- Type C = thread with tip
- Type F = thread without tip
- Type R = thread with rounded tip
Stainless steel tapping screws are softer than case-hardening steel tapping screws. These screws therefore do not form a counter thread in steel sheets. For this reason, they should only be used in soft materials, such as aluminium.
Datasheets(X)
 | |
Material | Stainless steel A2 |
Surface | Plain |
Form | C |
Nominal diameter (d1) | 4.2 mm |
Length (l1) | 70 mm |
Head diameter (dk) | 8.2 mm |
Head height (k1) | 3.05 mm |
Internal drive | H2 |
DIN | 7981 |
Head type | Pan head |
Declaration of performance (EU-CPR) | No |
Standards | DIN 7981 |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Shape of tip | C |
Last viewed
C 6.3 slotted bit (1/4 inch)
1/4 inch cardan joint
C 6.3 TX bit (1/4 inch)
1/2-inch socket wrench insert, TX head for external TX screws, short
3/8 inch extension
1/2 inch socket wrench insert metric, hexagon, short
Metric XZN bit 10 mm hexagon drive
Metric ratchet combination wrench Flexible ratchet head with POWERDRIV®
1/2 inch socket wrench insert, metric
Metric combination wrench with POWERDRIV®