Nylon anchor
DWL-PLA-14X75
Register now and access more than 125,000 products
- High-quality polyamide (nylon).
- Halogen- and silicone-free.
- Temperature-resistant from -40 °C to +80 °C.
- Hammer-in stop prevents premature expansion of the fixing during installation.
- The anti-rotation lock prevents rotation in the drill hole.
- Fixing shaft without expansion zone prevents damage to plaster and tiles.
- Suitable for push-through and pre-positioned installation.
- We recommend the ASSY-D screw for installation.
- Drill perforated blocks with a rotary drill (without impact mechanism).
- Drill cuttings must be removed from the drill hole.
- Screw length = fixture thickness (+ plaster/insulation thickness) + fixing length + screw diameter.
Datasheets(X)
- Plastic anchor for light loads (secondary attachments)
- Can be used in concrete, solid brick, solid sand-lime brick, hard natural stone
- Suitable for securing curtain rails, wall shelves, light wall cupboards, picture frames, cable ducts, cable clamps, electrical switches, towel rails, signs, motion detectors, hanging baskets etc.
- For attaching components in conjunction with a wood or chipboard screw (without drill tip, counter thread, ring thread) (e.g. ASSY-D)
- Can be used outdoors or in wet rooms in conjunction with a stainless steel screw
Anchor diameter | 14 mm |
Anchor length (l) | 75 mm |
Embedding depth (h nom) | 75 mm |
Nominal drill-bit diameter (d 0) | 14 mm |
Required wood screw diameter (d scr.wood) | 10 - 12 mm |
Required particle-board screw diameter (d scr.particle) | 12 mm |
Min. required screw diameter | 10 mm |
Max. required screw diameter | 12 mm |
Embedding depth (h s) | 75 mm |
Centre-to-centre distance (a) | 140 mm |
Edge clearance (a r) | 70 mm |
Drill hole depth (t) | 85 mm |
Max. attachment height (d a) - condition | Dependent on screw length |
Required screw length (l s) | Thickness of the add-on part (+ plaster/insulation thickness) + anchor length + screw diameter |
Last viewed
Grease gun with spray pipe
Unit connector
C 6.3 bit hexagon socket (1/4 inch)
SMART STEP EU+ HSCo nanoProtect hexagon combination screw tap assortment 6 pieces
SPEED cutting disc for steel
Turn signal and brake light bulb
Three-way nozzle for HDR 175/200
1/2 inch impact socket wrench insert hexagon, metric, short
Top Gun Plus wide extractor set with 4 adapters
Locking disc spring washer, type M Spring steel hardened 420-510 HV10, zinc-flake coated