Mobile plastic upright distributor
Plastic-upright splitter
PWRDISTR-PLA-(4XCEE16A)
Register now and access more than 125,000 products
- 4 rubberised feet for secure placement
- Feet can be used to wind up connecting cable
- Impact and weather-resistant plastic housing
- Space-saving
When used in combination with upstream construction site power distribution points, types without residual current device (RCD) can be used. Protection against fault currents is then ensured by the built-in RCD on the supplying construction site power distribution point.
Datasheets(X)
- For indoor and outdoor use
- Portable socket distributors as a special supply point in accordance with DIN VDE 0100 Part 704 for connecting AC and three-phase power consumers on construction sites downstream of a connection distributor cabinet or a distributor/end distributor cabinet.
Output | 4 CEE 16 A, 5 pin, 400 V |
Input | CEE 16 A, 5 pin, 400 V |
Cable type | H07RN-F5G2.5 mm² |
Cable length | 2 m |
Main fuse | Non secured |
Connected load | 11 kVA |
IP protection class | IP 44 |
Protection class | Protection class II/protective insulation |
Min./max. temperature conditions | -25 to 40 °C |
Material | PA - Polyamide |
Length x width x height | 250 x 250 x 245 mm |
Last viewed
Hexagon nut, flat profile with fine thread DIN 936, steel, zinc-plated, blue passivated (A2K)
Cetus®X-treme safety goggles
Hex. standard mount, size 11 for drills
Flat connector MINI MIC SRS 1.5
MFD-S multi-purpose drill bit with straight shank
WÜTOX countersunk head partial thread TX Wood screw
Contact tip holder Binzel
Hexagon socket set screw with ring cutter ISO 4029, steel, 45H, plain
Suction unit for extraction drill bit Plus QM
Hexagon bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain