Hex head screw with thread up to head DIN 933, steel 8.8U, hot-dip galvanised (hdg)
DIN 933 hot-dip galvanised steel 8.8U
SCR-HEX-DIN933-8.8U-WS13-(HDG)-M8X45
Register now and access more than 125,000 products
- Manufactured with undersized thread in tolerance class 6AZ (thread play) before surface protection is applied (DIN EN ISO 10684).
- The screws are ISO-compliant after hot-dip galvanisation.
- The screws must not be used with nuts that have an oversized thread. This can create problems in the screwed joint and may cause the connection to fail.
DIN 933 has been withdrawn and replaced by ISO 4017. There is some similarity (nominal dimensions extended | width across flats changed for M10, M12, M14 and M22).
Datasheets(X)
Last viewed
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
3/8 INCH SOCKET WRENCH INSERT METRIC, HEXAGON (HX), SHORT
Twist drill bit HSCO DIN 338 type RN
Hercules S3 safety boots
Spare parts - machines
Assembly glove PU black
Polishing pads
First segment With G 1/2 inch female thread for pneumatic air multi-port distributors
Tool head, small design For crimping pliers
Half visor adapter for SH 3000 safety helmet