Drilling screw, round head with collar and H cross recess pias®
pias steel zinc plated pan head H with flange
SCR-DBIT-PANHD-FLG-H2-4,2X25 WHITE
Register now and access more than 125,000 products
Drilling, threading, screwing-in — all in one work step
Therefore considerably reduced time and effort
Exact drilling diameter for each screw connection
- Resulting in minimisation of thread tolerance
- Always an optimum connection
Prevents installation errors
- The pressed-on flange generates a lower surface pressure, which helps to prevent stress cracks
- Contact pressure during use approx. 100 N/screw in with depth stop if necessary
- Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)
- The use of impact screwdrivers is not permitted
- Drilling screws must be attached perpendicular to the surface of the component
Galvanized drilling screws may only be used where dampness is not to be expected.
For fasteners with a construction permit, the permit, and in particular Part 2 "Special regulations", must always be observed.
Datasheets(X)
The self-drilling screw for fastening plastic and thin sheet metal to metal sub-structures.
Last viewed
Paper filter bag for ISS series
Die For standard metric ISO thread HSCo Multi Performance
Backing pad with cooling grooves For vulcanised fibre discs
Tool head, small design For crimping pliers
Die For standard metric ISO thread HSCo Multi Performance
Release tool for connectors with multiple locking lugs
ORSY®BULL box front loader series 5
Data and charging cable 2-in-1 Micro USB and USB Type-C/USB Type-A
Single ear clamp pliers for Oetiker and axle boot clamps
Flat washer without chamfer ISO 7089 steel 200 HV, zinc-nickel black (ZNBH)