Cut protection glove W-500 Level F
Cut-resistant glove W-500 Level F
CUTRESGLOV-(W-500)-(LEVEL F)-SZ7
Register now and access more than 125,000 products
- Outstanding mechanical resistance in terms of cut and abrasion resistance
- Nitrile foam coating with outstanding grip and good resistance against grease and oils
- Additional reinforcement in the crook of the thumb ensures extended service life
- Good puncture resistance against metal chips
- Good fit
Datasheets(X)
For work involving maximum cut protection, abrasion resistance and puncture resistance requirements when handling glass and in metalworking, automotive, recycling and maintenance applications.
Size | 7 |
Gauge | 13 |
Material of liner | HDPE/steel/basalt/polyester/elastane |
Material of coating | Nitrile foam |
Standards | EN 388, EN 420 |
Cut resistance according to ISO 13997 | F |
Category | II |
Last viewed
Lashing strap with clamping lock and fitting
Hexagon socket set screw with ring cutter ISO 4029, A4 stainless steel, 21H, plain
Hexagon nut, low profile ISO 4035 steel 05, zinc-plated blue passivated (A2K)
1/4 inch socket wrench insert, metric short
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 8.8, blue passivated
Jaws, set
MIG/MAG welding system MIG 280
Riveter, accordion
Coil for induction heater IEG-1200 POWER
Work shorts Nordic ¾ legs