Combined abrasive fleece/cloth matting body (mixed corundum)
Combi matting body
MATBDY-COMBI-G180/150-50X30X6MM
Register now and access more than 125,000 products
High sanding effect
Additional abrasive cloths between the abrasive fleece
- At high rotation speeds, coarse grain acts finer, and at low speeds fine grain acts coarser
- Use tools with a low contact pressure; heavy contact pressure causes premature wear
- If there is insufficient removal, do not increase the contact pressure. Instead, use coarser grains
Datasheets(X)
Diameter x width x shaft diameter | 50 x 30 x 6 mm |
Colour | Red brown |
Material to be processed | Forged steel, Malleable cast iron, Grey cast iron, C-steel, Deep-drawn steel, Steels bands, Injection-moulded zinc, Non-ferrous metal, Cr-Ni and other stainless steels, Wood |
Last viewed
Hexagon bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
Screwdriver for hexagon drive with flexible shaft
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Single wire seal (SEAL) For uninsulated cable connector
Twist drill bit HSCo DIN 338 MFD Speed
Hexagon bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
Bevelled-edge chisel in accordance with DIN 5139
Thread die HSS DIN EN 22568 for standard metric ISO threads
Sandpaper strip Useit® Superpad wood
First aid kit M Cederroth