Welcome to Würth Estonia For trade customers only

Butyl sealing compound

Butyl sealing compound
SRFSEAL-BUTYL-GREY-310ML

Art.-no. 0893100063
EAN 4066443134869
Prices for customers after login
Butyl sealing compound

Art.-no. 0893100063

Prices for customers after login
Quantity
PU
x 15 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Elastic, non-shrinking, non-hardening sealant for construction and HVAC installations
  • Adheres to all common construction site materials

  • For low-movement joints, where the stretch is max. 7 %

  • Mainly used for joints that are hidden

  • Easy to apply

  • Can be painted over approx. 24 hours after application

  • Does not stain porous materials

  • Forms an elastic film when it dries, remains unhardened on the inside

  • The joint can be easily opened afterwards
Notice

NOTE Although the paste forms a film on the surface when it dries, the mass under the film does not dry out but remains soft.


The paste is not recommended, for example, for the installation of the toilet seat, or for the joints of its body parts.


Very good sealant for installations that need to be easily opened again, or for areas where the seam remains completely hidden.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Surface sealing of the thermal insulation seam between the door / window frames and the frame (can be installed over insulation wool) before moulding.


Sealing the continuation / end seam of rain gutters.


Sealing the seams of ventilation pipes.


Suitable for many installations where you want the seam to remain elastic, i.e. easy to open again.

Instructions

The surface must be: dry, clean, dust-free and grease-free.


Extrude the paste in the desired place and smooth the finished surface with a trowel dipped in soapy water, for example.


Stain removal with turpentine, immediately while fresh.


The minimum width of the seam is 5 mm.


The minimum width of the seam is 20 mm.


Recommended seam dimensions: width = depth.

Chemical basis

Butyl natural rubber

Density

1.7 g/cm³

Density conditions

at 20°C, 50% relative humidity

Colour

Grey

Smell/fragrance

Odourless

Conditions for skin-formation time

at 20°C and 50% relative humidity

Contents

310 ml

Weight of content

527 g

Shelf life from production

12 Month

Conditions to maintain shelf life from production

at 10°C to 25°C

Max. processing temperature

80 °C

Min. processing temperature

-20 °C

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information