Ball snap catch, screw-in
Ball closer to turn in
CLSR-BALL-ST-(BRS)-TURNIN-D12MM
Register now and access more than 125,000 products
Specified dimensions not binding. Subject to technical changes.
Datasheets(X)
As the drill hole diameter for each ball snap catch, we recommend a bore that is 0.5 mm smaller than its outer diameter.
 | |
Material | Steel |
Surface | Brass plated |
Diameter | 12 mm |
Drill diameter | 11.5 mm |
Length | 14.5 mm |
Last viewed
Grease gun with spray pipe
Hooked blade in dispenser
HSS DIN 338 SMART STEP twist drill bit
Twist drill bit HSCo DIN 338 MFD Speed
3/4" POWERDRIV® socket wrench insert metric, hexagon
Twist drill bit HSS DIN 338 type RN 118°
Pin punch, large dimensions with 2-component plastic handle
SMART STEP EU+ HSCo twist drill bit DIN 338
HDR 175 COMPACT high-pressure cleaner
Double-jointed socket wrench