Anaerobic adhesive activator
Activator, anaerobic adhesive
ACT-(ANAEROB-ADH)-100ML
Register now and access more than 125,000 products
The use of an accelerator reduces the final strength by approximately 20% compared to normal values.
Datasheets(X)
For the installation of door frames, windowsills and steps.
The accelerator must be applied for at least two minutes before the application of the adhesive, usually on one side of the connection, sometimes on both sides, whereby the solvent must evaporate completely before the adhesive can be applied.
Shelf life from production | 18 Month |
Colour | Turquoise blue |
Density | 0.8 g/cm³ |
Min. flashing point | 21 °C |
Chemical basis | Water and propanol |
Contents | 100 ml |
Smell/fragrance | Solvent-like |
Last viewed
Thread hanger W-GWA Suitable for all DIGA® CS devices
Nylon Sanding Fleece Disc For wheel hub grinders
Pneumatic die grinder GDS035-045BX Deprag
Lock washer For shafts DIN 6799, phosphated steel
Hose clamp with asymmetrical lock
Type Q staples
½ INCH SOCKET WRENCH INSERT METRIC, HEXAGON (HEX), SHORT
1/4" socket wrench insert For hexagon socket, metric
1/2 INCH CARDAN JOINT
Flat chisel Plus Longlife & Speed