1-component gun foam Winter

The surface must be dry, frost-free and solid, have a high degree of dimensional stability, and be free from dust, dirt, oil, grease, release agents and loose parts. Before use, shake the can approx. 20 times. Screw on the valve lever. Hold the upside down and carefully actuate the valve lever to release the foam. Once hardened, the foam is fully dimensionally stable. The hardened foam can be plastered, painted and pasted over. With large quantities of foam and when the atmosphere is dry, e.g. in winter, moistening the surfaces and the foam improves the foam quality and reduces the hardening time. Remove fresh spray splashes or when taking a break, immediately remove fresh foam from the valve and pipe using PURlogic® Clean, art. no. 0892 160.